Best Above Ground Pool Heat Pumps 2023

The Mini Heat Pump is an electric pool heater that is suitable for small pools up to 3962 gallons. The larger the pool, the longer the heating time. This heat pump is perfect for above ground swimming pools, hot tubs, or spas.

The above ground pool heat pump is a device that helps to keep the pool water warm. It works by circulating the water through the pump and heating it up. The pump comes with a built in power cable and plug, and it requires 110V of power and 60 Hz of frequency to operate.

The heat pump is an energy-efficient way to heat your pool, and it has a low operating cost. It is also a low-power heat pump, so it won’t use a lot of energy.

This above ground pool heat pump is high efficiency, easy to hook up, and has a flat-tube titanium heat exchanger for 30% higher heat exchanging efficiency.

This heat pump is designed for above ground pools and comes with a number of features to ensure safety and security. These features include a child lock, an advanced protection system with auto electrical-leakage and low-voltage switch, and high and low-temperature protection. Additionally, the compressor discharge over-high protection ensures that the heat pump will not overheat and will shut off automatically if it does.

This above ground pool heat pump is designed for pools with up to 4700 gallons of water, and can operate in outdoor temperatures of 40 to 105 degrees Fahrenheit. The swimming pool can be heated up to 100 degrees Fahrenheit.

The above ground pool heat pump is easy to install and does not require professional installation. You can simply hook up the quick connectors and then plug and play. There is no need for professional tools or a plumber.

This above ground pool heat pump is a highly efficient, low operating cost heating system that will extend the fun for a few more months!

This heat pump is designed for above ground pools and is a more energy efficient option than gas or electric heaters.

The pool heat pump has a powerful compressor that outputs a capacity of 14500 BTU/hr. The pure titanium heat exchanger can resist any corrosion from pool water. The intelligent control system maintains the pool temperature at a consistent level. Once it starts operating, you don’t need to adjust any settings, just enjoy a warm and heated swimming pool!

This heat pump is ideal for above ground pools of up to 2000 gallons. It can be used for above-ground swimming pools, hot tubs, or spas.

This above ground pool heat pump is an energy-saving option for maintaining the ideal water temperature. The pump has an energy efficiency of 4.5, using the surrounding air to heat the pool, which is more economical than propane, natural gas, and electric heaters.

The above ground pool heat pump is a powerful compressor that can heat up a pool quickly. It has a capacity of 12000BTU/hr and a pure titanium heat exchanger that can resist any corrosion from pool water. The heat pump also has an intelligent control system that maintains the pool temperature at a consistent level.

This above ground pool heat pump is easy to assemble, does not require professional installation, and is for use with 110V, 60Hz USA electricity. It comes with a built-in 8 foot long power cable with standard USA plug.

This above ground pool heat pump features a child lock and an advanced protection system which has auto electrical leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection. This will provide the shopper with premium security and peace of mind when using this product.

The heat pump should be placed upright for better results, and a solar cover can help the pool’s temperature rise quickly.

ECOPOOLTECH Pool Heater EU50S is an above ground pool heat pump that is highly efficient and has a low operating cost, making it perfect for extend the pool season for a few more months!

This above ground pool heat pump is based on heat pump technology and is very efficient, converting 5.44 times more heat than it uses in electricity.

The Pool heat pump EU50S is designed for above ground pools with up to 4000 gallons of water (No bigger than 15ft round or 9x18ft rectangular). This unit can operate at outdoor temperatures of 40ºF to 105 ºF, while the pool can be heated up to 100ºF.

This above ground pool heat pump is easy to install, with no professional installation required. You can simply hook up the quick connectors and start using it right away. There is no need for any tools or a plumber.

This pool heat pump is equipped with a powerful compressor and a pure titanium heat exchanger, making it a safe and easy-to-use option for heating your pool.

The Multipurpose Swimming Pool Heat Pump is a powerful pool heat pump that can be used for in-ground pools up to 22,000 gallons. This heat pump is also a great solution for on-ground pools, as it has a heating capacity that is far greater than 22,000 gallons.

This heat pump is designed to be high efficiency while consuming less energy. The pump is able to maintain a higher temperature with less power consumption.

The pool heat pump has a flat tube titanium heat exchanger that is 30% more efficient than spiral tubes, meaning that it will not waste any money.

This heat pump is designed for above ground pools and is quiet and efficient. The body is made of galvanized steel that is rust-resistant and the digital LED display makes it easy to set the temperature.

The above ground pool heat pump has an advanced protection system with automatic electrical-leakage protection, low-voltage switch, too high and low temperature protection, and compressor discharging protection.

This is an above ground pool heat pump that has a 120 volt, 60Hz, 10A draw.

This product has a built-in 8-foot power cable with a standard USA plug, making it an easy and convenient way to keep your above-ground pool heated.

This above ground pool heat pump is suitable for pools up to 7500 gallons in coastal climates.

The above ground pool heat pump must be plugged into an outlet that is protected by a ground fault circuit interrupter (GFCI) in order to work properly and safely.

The Swimming Pool Heat Pump is an electric pool heater that is suitable for small above-ground pools up to 6600 gallons and in-ground pools up to 4,226 gallons. This heat pump is your perfect solution for above ground and inground swimming pools with 2 inch/50mm water hose connection.

This heat pump is designed for easy installation and efficient operation. The flat-tube titanium heat exchanger provides 30% more heat exchange efficiency than spiral tubes.

This above ground pool heat pump is designed for efficiency and quiet operation. The body panels are made of galvanized steel for durability and the setting water temperature is displayed on a digital LED display.

For a shopper, the above ground pool heat pumps premium security features are important. The child lock, advanced protection system with auto electrical-leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection are all great features that will keep the pool safe and operational.

This above ground pool heat pump is for a shopper in the USA and requires 220-240 volts and 60 HZ for USA electricity. It has a built in 11.5 foot long power cable with standard USA plug. If there is any confusion about the plug, please contact us in time and we will be happy to help you.

This thermostat is designed to keep the water in an above ground pool at a comfortable temperature. It is easy to install and will automatically turn on the heat pump when the water temperature drops.

This heat pump is designed for above ground pools. It has a voltage of 220V / 240 and a power of 11KW 50/60HZ.

The pool heat pump has an automatic heating feature that will turn on the pump when the temperature drops a few degrees below the preset temperature.

The above ground pool heat pumps are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating.This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch,it improves greatly of trouble free in working time, adaptability of water environment and stability.

This above ground pool heat pump has a 5.1 year warranty, meaning that it is backed by the manufacturer for 5.1 years. This is a great feature for a shopper, as it provides peace of mind knowing that the product is covered in case of any defects.

The above ground pool heat pump uses advanced heat pump technology to efficiently heat your pool. This pool heat pump uses less energy than natural gas and propane heaters, making it a more economical and environmentally friendly choice.

This above ground pool heat pump is perfect for those who want to maintain ideal water temperatures, even in harsh weather conditions.

The digital control panel displays temperature and allows for simple control of settings. This heat pump is designed for above ground pools and is a great way to keep your pool water warm.

This above ground pool heat pump is efficient and quiet, with a durable titanium heat exchanger.

The above ground pool heat pump is certified by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) and has been independently lab-tested to ensure the highest quality performance and value.

The above ground pool heat pump uses solar technology to increase the temperature of the pool water by approximately 3 to 5 degrees.

This heat pump is easy to connect and can be used with a filter pump that has a horsepower of up to 1/2 or a flow rate of less than 2500 gallons per hour.

This heat pump is suitable for above ground pools up to 8000 gallons.

This heat pump includes 1 1/4″ (32mm) hose attachment points, making it ideal for use with above ground pools.